行業資訊
瀝青墊層施工如何打造出路基頁面
來源：http://guixin.net.cn/ 日期：2023-10-30
隨著城市化進程的加速，道路建設成為了重要的基礎設施之一。在道路建設中，瀝青墊層作為關鍵的基層結構，其施工質量直接影響到路面的使用壽命和行車。本文將詳細介紹瀝青墊層的施工要求，幫助您了解如何打造一個堅固耐用的路面基礎。
With the acceleration of urbanization, road construction has become one of the important infrastructure. In road construction, asphalt cushion is a key base structure, and its construction quality directly affects the service life and driving safety of the road surface. This article will provide a detailed introduction to the construction requirements of asphalt cushion, helping you understand how to create a sturdy and durable pavement foundation.
一、施工前準備
1、 Preparation before construction
清理基層：在鋪設瀝青墊層前，必須將基層表面清理干凈，確保無雜物、浮土等。
Cleaning the base layer: Before laying the asphalt cushion layer, the surface of the base layer must be cleaned to ensure that there are no debris, floating soil, etc.
檢查設備：確保瀝青攪拌設備、運輸車輛等設備完好，避免因設備故障影響施工進度。
Equipment inspection: Ensure that asphalt mixing equipment, transportation vehicles, and other equipment are in good condition to avoid affecting the construction progress due to equipment failures.
二、瀝青混合料的制備
2、 Preparation of asphalt mixture
原材料選擇：選用瀝青、碎石、砂等原材料，確?；旌狭系馁|(zhì)量。
Raw material selection: Select high-quality asphalt, crushed stone, sand and other raw materials to ensure the quality of the mixture.
比例調配：根據設計要求，合理調配瀝青與碎石、砂等原材料的比例。
Proportional allocation: Reasonably allocate the proportion of asphalt to raw materials such as crushed stone and sand according to design requirements.
攪拌：采用的攪拌設備，確?；旌狭铣浞?jǐn)嚢杈鶆颉?/div>
Mixing: Professional mixing equipment is used to ensure that the mixture is thoroughly and evenly mixed.
三、瀝青墊層鋪設
3、 Asphalt cushion laying
運輸：將攪拌好的瀝青混合料運輸?shù)绞┕がF(xiàn)場。
Transportation: Transport the mixed asphalt mixture to the construction site.
鋪設：采用的鋪設機械，將瀝青混合料均勻鋪設在基層上。
Laying: Professional laying machinery is used to evenly lay the asphalt mixture on the base layer.
壓實：采用壓路機對鋪設好的瀝青墊層進行壓實，確保墊層密實度達到設計要求。
Compaction: Use a roller to compact the laid asphalt cushion layer, ensuring that the compactness of the cushion layer meets the design requirements.
四、施工質量控制
4、 Construction quality control
厚度控制：在施工過程中，要隨時檢查瀝青墊層的厚度，確保厚度偏差在允許范圍內。
Thickness control: During the construction process, the thickness of the asphalt cushion layer should be checked at any time to ensure that the thickness deviation is within the allowable range.
壓實度檢測：對壓實后的瀝青墊層進行抽檢，確保密實度達到設計要求。
Compaction detection: Conduct spot checks on the compacted asphalt cushion to ensure that the compactness meets the design requirements.
防水措施：在瀝青墊層施工完成后，要進行防水處理，防止水分滲透。
Waterproof measures: After the completion of asphalt cushion construction, waterproof treatment should be carried out to prevent water infiltration.
五、注意事項
5、 Precautions
施工溫度：瀝青墊層的施工溫度應保持在一定范圍內，避免因溫度過高導致瀝青老化或溫度過低導致混合料無法壓實。
Construction temperature: The construction temperature of the asphalt cushion layer should be maintained within a certain range to avoid aging of the asphalt due to high temperature or failure to compact the mixture due to low temperature.
工人培訓：對施工人員進行培訓，提高工人的技能水平，確保施工質量。
Worker training: Provide professional training for construction personnel to improve their skills and ensure construction quality.
防護：在施工過程中，要做好防護措施，佩戴帽、防護眼鏡等，確保工人和行人的。
Safety protection: During the construction process, safety protection measures should be taken, such as wearing safety helmets and protective glasses, to ensure the safety of workers and pedestrians.
六、要求
6、 Environmental requirements
減少噪音污染：在施工過程中，要盡量減少噪音的產生，避免影響周邊居民的正常生活。
Reduce noise pollution: During the construction process, it is necessary to minimize the generation of noise as much as possible to avoid affecting the normal lives of surrounding residents.
減少塵土污染：對施工現場進行灑水降塵，減少塵土污染對周邊環境的影響。
Reduce dust pollution: Spray water on the construction site to reduce the impact of dust pollution on the surrounding environment.
廢棄物處理：對施工廢棄物進行分類處理，可回收利用的盡量回收利用，不能回收利用的應按規定進行處理，避免對環境造成污染。
Waste treatment: Classify and dispose of construction waste. Recyclable waste should be recycled as much as possible, while those that cannot be recycled should be treated according to regulations to avoid environmental pollution.
總之，瀝青墊層的施工要求包括原材料選擇、比例調配、攪拌、鋪設、壓實等多個環節，每個環節的施工質量都會影響到路面的使用壽命和行車。因此，在施工過程中，要嚴格按照施工要求進行操作，確保施工質量符合標準。同時，還要注意要求，減少對周邊環境的污染影響。只有這樣，才能打造出一個堅固耐用、的路面基礎，為城市的繁榮和發展做出貢獻。
In summary, the construction requirements of asphalt cushion include multiple links such as raw material selection, proportion allocation, mixing, laying, compaction, etc. The construction quality of each link will affect the service life of the road surface and driving safety. Therefore, during the construction process, it is necessary to strictly follow the construction requirements to ensure that the construction quality meets the standards. At the same time, attention should also be paid to environmental requirements to reduce the pollution impact on the surrounding environment. Only in this way can a sturdy, durable, safe and environmentally friendly road foundation be created, contributing to the prosperity and development of the city.
公司地址：濟南市商河縣賈莊鎮民營經濟創業園
公司名稱:永誠廣建公路材料（山東）有限公司 
備案號：