高頻共振破碎機是指根據共振原理，使水泥混凝土路面和高頻共振破碎機產生共振現象，將水泥混凝土路面破碎成上層相互配合、下層相互配合的水泥混凝土碎石粒料層的技術。碎石的形狀相鄰互補，粒徑小，形成相互配合擠壓的穩定結構，高頻共振破碎機了原水泥混凝土路面板在裂縫、接縫處的水平和垂直位移，了原板裂縫向上反射的應力，該層強度和剛度為級配碎石哦同時對舊公路基礎的影響也很小，是目前水泥混凝土路面鋪裝易出現反射裂縫問題的有效途徑。 共鳴碎石是一種老水泥混凝土路面的破碎技術，主要由共鳴錘頭破碎混凝土道路、加固穩定的共碎石化結構、準確設計路面鋪裝三個主要部分組成

High frequency resonance crusher refers to the technology that, based on the principle of resonance, causes resonance between the cement concrete pavement and the high-frequency resonance crusher, and breaks the cement concrete pavement into a layer of cement concrete crushed stone particles with upper and lower layers cooperating with each other. The shapes of the crushed stones are adjacent and complementary, with small particle sizes, forming a stable structure that cooperates and compresses with each other. The high-frequency resonance crusher solves the horizontal and vertical displacement of the original cement concrete pavement panel at cracks and joints, eliminating the stress reflected upwards by the original slab cracks. The strength and stiffness of this layer are graded crushed stones, and the impact on the old highway foundation is also minimal, It is an effective way to solve the problem of reflection cracks that are prone to occur in the current cement concrete pavement pavement. Resonant crushed stone is a crushing technology for old cement concrete pavement, mainly composed of three main parts: resonant hammer crushing concrete pavement, reinforced and stable eutectic petrochemical structure, and accurate design of pavement paving

高頻共振破碎機是諧振碎石化技術的專用設備。 該設備獨特的諧振技術可以持續產生高頻低振幅能量，從破碎錘頭傳遞到水泥混凝土板產生振動諧波，振動錘頭在高頻低振動下進行小能量破碎，路面層內產生均勻裂縫，隨著振動迅速規律共振破碎的破碎方式優于破碎和破碎。 高頻共振破碎機利用振動體探測工作錘，通過錘與路面接觸，使錘的振動頻率接近混凝土面板的固有振動頻率，使混凝土面板在錘下的局部范圍內諧振，迅速減小混凝土內部顆粒之間的內摩擦阻力，使其坍塌水泥面板的固有振動頻率根據材質和厚度的不同，頻率范圍約在40-70Hz之間。

High frequency resonance crusher is a specialized equipment for resonance crushing petrochemical technology. The unique resonance technology of this device can continuously generate high-frequency and low amplitude energy, which is transmitted from the crushing hammer to the cement concrete slab to generate vibration harmonics. The vibrating hammer performs small energy crushing under high-frequency and low vibration, producing uniform cracks in the pavement layer. With the rapid and regular vibration, the resonance crushing method is superior to crushing and crushing. The high-frequency resonance crusher uses a vibrating body to detect the working hammer. By contacting the hammer with the road surface, the vibration frequency of the hammer is close to the natural vibration frequency of the concrete panel, causing the concrete panel to resonate locally under the hammer, rapidly reducing the internal friction resistance between particles inside the concrete, and causing the natural vibration frequency of the collapsed cement panel to vary depending on the material and thickness, with a frequency range of approximately 40-70Hz.

高頻共振破碎機工作參數工作頻率：40-70Hz工作振幅：10-20mm破碎厚度：單層水泥板全深度(目前實踐的深度為40cm ) (工作效率33602000-3000-3000 每天整車尺寸： 8000mm*2800mm* 3100mm整車質量： 35噸的計算機自動調整頻率，自動變力，從而控制石頭尺寸和破裂程度高頻共振破碎機的獨特優勢GP60可以全斷面多方面破碎，破碎路邊，不留棱角，無需其他配套設備破碎; GP60的標準頻率可達70Hz或更高，能適應不同路況下的水泥板頻率，破碎效果好。 其效果主要是上表面層破碎厚度均勻、密實，易于逐板粘結，下層裂紋更充分、更致密; 故障率低，比同類設備提高20%生產率。

Working parameters of high-frequency resonance crusher Working frequency: 40-70Hz Working amplitude: 10-20mm Crushing thickness: Full depth of single-layer cement board (currently practiced depth is 40cm) (Work efficiency 33602000-3000-3000 per day. Vehicle size: 8000mm * 2800mm * 3100mm. Vehicle weight: 35 tons. The computer automatically adjusts the frequency and changes the force to control the size and degree of stone fracture. The unique advantage of the high-frequency resonance crusher is that GP60 can break the entire section in multiple ways, leaving no edges or corners, and no other supporting equipment is needed to break it. The standard frequency of GP60 can reach 70Hz or higher, which can adapt to cement boards under different road conditions.) Frequency and good crushing effect. The main effect is that the upper surface layer has a uniform and dense crushing thickness, which is easy to bond plate by plate, and the cracks in the lower layer are more abundant and dense; Low failure rate, increased productivity by 20% compared to similar equipment.